Noise in neutral

K

Kootenaycat

Member

Feb 27, 2002

37

0

• Mar 31, 2002

• #1

I finally got the '01 220 broke in yesterday, and at the end of the day I noticed a rattle noise when in neutral only after I let the clutch out. The trans level is at the top of the window, so any ideas? It's still under warranty, so I'll get it checked out, but just curious if anyone else has heard this.

 

R

ride_red_15

Uhhh...

Oct 14, 2001

574

0

• Mar 31, 2002

• #2

yeah my 02' 220 does it too...and my friends KDX does it also.. i think its just one of those things

 

X

xpwarrior

Member

Jan 14, 2001

40

0

• Mar 31, 2002

• #3

The noise is normal for a KDX. Running a full quart of oil in the gearbox help quiet it a little.

 

L

Lew

LIFETIME SPONSOR

Aug 27, 2001

605

0

• Apr 1, 2002

• #4

Both mine have done that from day one. Like xpwarrior states a full quart will help. I use ATF cause its cheap.
Lew

 

K

KdxChode

Member

Jun 18, 2001

327

0

• Apr 1, 2002

• #5

It's the clutch, They all do it so get used to the desiel sound. Perfectly normal for a KDX.

 

K

kevinkdx

Member

Mar 25, 2001

481

0

• Apr 1, 2002

• #6

get used to it!

 

K

Kootenaycat

Member

Feb 27, 2002

37

0

• Apr 1, 2002

• Thread starter
• #7

Thanks guys! Puts my mind at ease! Being an auto tech, I'm not used to hearing unusual noises from the drivetrain!

 

L

Luv2Ride

Member

Nov 21, 2000

32

0

• Apr 1, 2002

• #8

Kootenaycat:

I would highly recommend checking and keeping the oil level just above the window. I would not exceed 1 full quart though. If you change your oil every 2-3 rides (keeping it clean) and you fill it above the line you will significantly reduce the intensity of the noise. But as everyone else stated above, it is a KDX thing so you should get used to it. However, if you hear the infamous high pitch whining you should stop the engine immediately (you're probably really low on oil) check and add oil as needed. If you continue to ride with low oil level chances are you will suffer clutch damage and who knows what else. Preventative Maintenance is the key, just as with everything else.

Aloha.

 

2

2big4akdx

LIFETIME SPONSOR

Jun 26, 2001

140

0

• Apr 2, 2002

• #9

Does anyone know just what causes this noise? And can anything be done to quiet it down.( Besides the oil level) Is the real problem loose machining tolerances? I have mine apart and I plan on taking a good look into this. I think that rattle is louder than the exhaust!!

 

K

kevinkdx

Member

Mar 25, 2001

481

0

• Apr 2, 2002

• #10

hehehe i really have no idea, i've never ventured into the clutch, but had everything else apart:)

 

G

gauner

Member

Apr 8, 2002

1

0

• Apr 15, 2002

• #11

It's clutch design and manufacture defect. Yes they are loud clutches. partially due to the way the case is made. The low oil level is a defect in the position of the site glass in the side cover and the bike it self is extreme lly quit. Mine is a 98 and has never had any problems associated with the clutch. I also run that Yama lube crank case oil that is 50 or 60 weight.( I think its 60 weight) Don't forget its not just one plate in cased in a heavy thick tranny housing under a car. good luck.