yz250roost
~SPONSOR~
- Oct 16, 2000
- 534
- 0
Hey guys, here's my problem and it just be because I worry about things too much, but I went out to work on my bike for the ride this weekend, and usually I just fill up the oil to the check hole. But this time I figured that I would put in the specified amount of oil and see when it starts coming out the hole. I put in 14oz, (I don't know the ml conversion because my syringe that I fill it with only has oz) but the book says to fill with 25 oz. At 14 oz it started coming out the fill hole, the bike was flat and level. So should I put the rest in? My concern is that maybe I'm changing the oil all wrong, should you heat up the bike first and then drain it, that's what the manual says but I've never done this. If you don't heat it up before the oil change, will some old oil stay in the case and throw off my measurements. Sorry to sound like such a newbie, I really am not I just never changed the oil properly, any advise would be greatly appreciated,
THanks in advance
Jeff
THanks in advance
Jeff