Parts Parts Parts

3Wheelerdude

Member
Nov 20, 2006
16
0
I bought a neglected 91 KDX 200. Bike has bicycle handlebar, just to give you an idea of the abuse!!!

Anyway, I need to know what is the right spark plug for this bike? It currently has a NGK BR9ES in it and is horriblly hard to start even after a full carb clean up.

I also would like to know which brake pads to order for this bike. Dealer asked if it was a E1 E2 or E3? In the stamped code on the goose neck, there is E1 in the combination. Does this mean I should order E1 brake pads?

Thanks guys, I ma really looking foward to bringing this monster back to life.
 

Chili

Lifetime Sponsor - Photog Moderator
Apr 9, 2002
8,062
17
BR9ES is the stock plug for a 91 KDX200. I know nothing about these bikes but the buykawasaki site identifies the 91 KDX200 as E3, I'm sure other KDX owners will be along shortly to confirm or debunk that theory.
 

iamthecowboy

Member
May 23, 2007
23
0
An engine needs 3 things to start, spark, gas and compression. Does the bike have all 3 of these? Does the bike finally start? Once started does it run, if it runs does it run well? Food for thought.
 

3Wheelerdude

Member
Nov 20, 2006
16
0
Yeah, bike is hard to start but will start with some help. It runs like a champ too. Once warm it start on the first kick. But then it sits over night and is a biatch to start again....

Compression, fuel, spark and air.....its got all 4.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…