Hey guys i have a 02 yz125 and i have been having trouble with my bike. i have already seized 2 pistons because the jetting was too lean but today it was like 50 so i went down from 440 main jet to a 430 (420 stock). I was riding the bike and it died and upon taking the top end off i looked at the piston and the front near exhaust was melted and the top was melted to. the spark plug was missing the little thing that sticks off of it. the cylinder now has some of the metal on the front and i was woundering if i can just get this honed or do i need to get it replated thanks. (eric you out there?)