thump chump
Member
- Jun 20, 2001
- 76
- 0
Originally posted by thump chump
So, when I do have to feather my clutch, I feel modulation through the lever
Originally posted by bashn
I don't know why your so obsessed with your top end. Tear it down down once a season for complete inspection. Replacing the piston once a season wether it needs it or not is good insurance against catastrophic failure due to cracking or hidden flaws. Personally, I think 5 hours is ludicrous.
Mark Boyd
'01 YZ267
The majority of problems I've seen in these situations have more to do with the mechanic than the manufacturer of the pistion.
Originally posted by DualSportr
JE, Arias and Ross pistons can be bored in at very tight tolerances - .0015" for pistons up to 76mm, and .002" up to 100mm. This means longer life and better ring/cylinder grip.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?