Reply to thread

Message

[QUOTE="BigRedAF, post: 1259627, member: 58172"]
I haven't seen that kind of spluge on a fender since the late 1970's.  Just run good fresh gas and non castor base oil.

H1R? Is that Honda's synthictic mix? If so that will be fine at 40:1.  Yamalube-R at 32:1 will work fine as will most.  There are a lot of good oils out there, just pick one and stick with it.  I've had piston scuffing and crank failures with MC1 years ago and won't even consider burning it in a camp fire.

Pro Circuit and FMF have recommended jetting specs for your bike.  They even drop the pilot at 1500MSL and run the clip in the second position.  The main drops I recommended are using the 1 down per 1500 feet theory as a safe starting range.

Have fun riding with your son, we break easier as we get old.  I know about those high dollar plugs.  I found out recently on a buddies RMZ450.

[url]http://s258.photobucket.com/albums/hh263/bigredaf/?action=view&current=ACPround1turn.jpg[/url]

Here is a link to a pic on my ride. :ride:
[/QUOTE]

Verification

Which ocean is California closest to?