Powersport Grafx Preprinted Backgrounds

[Smit-Dog]

Installed a set of pre-printed background numbers for my bike. Ordered them from www.powersportgrafx.com

Very thick, high quality decals. The available designs, fonts, colors, logos, etc. are only limited by your imagination. I used orange piping and a chrome font color. Bart, one of the owners, is very helpful is getting your selection sorted out. When ordering, be sure to let them know if you want an MX-style front plate with numbers, or enduro style (blank) for row numbers.

You can get just about any logo printed on the background. I requested that the "PG" logo be left off, but unfortunately they didn't do it. :|

Powersport Grafx also contributes quite a bit back to the sport, most recently donating custom background graphics for a DRZ-100 prize bike being given away at a ride event.

They also sell "GripZ", really thick and grippy decals for your shrouds and airbox. Once the stock decals on my EXC airbox wear through (almost there after only 10 hours on the bike), I'll be ordering a set for the airbox.

Powersport Grafx also does the background decals listed in the KTM Hard Parts catalog, and recently did the backgrounds on the KTM 200 EXC test bike featured in an upcoming issue of Dirt Rider magazine. (http://www.enduroeng.com/viewphoto.asp?entrynumber=6&placeholder=)

Here are a few more pics:

http://community.webshots.com/photo/125374931/140880518sLEqVY

http://community.webshots.com/photo/125374931/140880551VJadbz

http://community.webshots.com/photo/125374931/140881022kYCNMH

http://community.webshots.com/photo/125374931/140881082eoPeWu

http://community.webshots.com/photo/125374931/140880583lUODYl

http://community.webshots.com/photo/125374931/140880608OiMntb

 

[truespode]

I have had my wife's bike done with custom graphics through them and had my bike number plates done through them.

They are really good and do give a lot back to the sport.

Ivan

 

[bushhawg]

Thanks!

Hi guys,
Thanks for the kind words Smit, even though we did self promote. Remind me of this when you place your next order. We work really hard to supply the best product that we can. We are at the races every weekend and are riders too! We try not to piss anyone off for fear of having a tree branch shoved through our spokes on the way through the woods (this wouldn't hurt my partner Broc because he's doesn't go fast enough). Ivan has been a champion of our cause for some time and it is greatly appreciated.
Thanks,
Bart Hayes
Powersport Grafx

 

[Smit-Dog]

The graphics look just as sweet in person. Great motivation to keep the bike upright while ripping through the woods - wouldn't want to tear up the pretty graphics now!

Saw a few pics in latest CCC magazine of the DRZ / Powersport Grafx bike being donated at the Phil Bean Memorial ride this June. Bart - are you going to make it up here for the ride and hog roast? I think you'd have a blast in the woods up here (if that's your element). http://dirtrider.net/forums3/showthread.php?t=97371

 

[bushhawg]

Broc will be coming to Michigan. I am working at finding him a bike for the ride as he will most likely fly up. I have to be at the WISP GNCC that weekend or I would be there. We support Brian Garrahan and Patrick Hayes as well as display at all the GNCC's so I can't bow out. Also, the WISP will be round 1 of the GNCC vendor row challenge, so I have to represent. So far its Writer guy (Jason Weigant) vs. Photo guy (David Smith) vs. Sticker guy (Me). Rules (so far) are no former fast guys (this is the Burleson rule) and no mud like last weekend. I can't wait to ride in Michigan sometime. You guys will have fun.
Thanks,
Bart

 

[Smit-Dog]

I'll look for Broc that weekend. Check with the EE/LC guys about "renting" a bike. Heard the'll barter for graphics, or really just a 12 pack of warm Pabst Blue Ribbon.

The Vendor Row challenge sounds cool. Beware of a Parts Unlimited rep on a CRF-450 - wicked fast.