Powervalve Problems I Think!!!

[Huskyriderone]

I have a problem with my 99' husqvarna WR125. Like when my bike has rested for a while it starts up just fine. Then like 2min later it just starts to like bog out and then dies. So i checked my spark plug and its all loaded up with oil so i cleaned it and it starts then dies again. After getting fustrated i noticed that oil was coming out of the hoses on my powervalve. So i took of the cover and saw that there was a broken peice and that their was a lot of oil. so i cleaned it and i am now waiting for that powervalve part. please let me know if their is any other problems that i need to fix or if the powervalve is the reason for my problems?.

 

[Huskyriderone]

someone please give me an answere i need help. I want to ride realy bad.

 

[nickyd]

your -pvalve is typically closed until you reach the higher RPMs - what part was broken?

 

[Huskyriderone]

The retainer. It just snapped in half. Do you think my problem could also be caused because my jets are to big and im running it to rich. I dont know what the size of jets are so im going to go to my local husqvarna shop and get smaller ones probably like 3 different sizes.