Reply to thread

Message: [QUOTE="whenfoxforks-ruled, post: 1359635, member: 73147"] The bolts that hold your ignition cover on, are the same size as the center case bolts, just longer. If they are too long, shim it up with washers. The diameter is important, and the thread pitch. The hardware and even menards has handy go- nogo gauges to determine what you have. The parts micro fiche will tell you the proper size also. Figure how much goes in for full thread, add the distance to the pulling face of the puller, get the next size longer. And a bunch of washers. [/QUOTE]