Reply to thread

Message: [QUOTE="kx2502009, post: 1373275, member: 113150"] my kx has 2 holes on the flywheel and i just threaded the holes and attached a harmonic balancer puller with two of my case bolts and it pulls right off every time it will also work to pull the cases get a puller and find 3 long bolts to thread into the stator holes run them in all the way and it should pull it right off its easier with a impact wrench but if there is shavings in the bottom end either your rod bearing in gone and if there is shavings down in the case then the shavings went threw the bearings and eat them up [/QUOTE]