Reply to thread

Message: [QUOTE="MXer666, post: 1249303, member: 78842"] Wos, holy replies. ive never gotten this much feedback in just one day. To be honest i never thaught of renting a bearing puller. Id think that i will be going in the way of heating my cases to get the bearings out. Although someone had made a good point about loosing alluminum each time a bearing is removed without heating the cases but im only dealing with the tranny shaft bearings and they are only pressed in. The crank bearings are heat and press fitted in and they require the cases to be heated to be removed, unlike the tranny shaft bearings. BUT seeing how old the bike is and how many times the bearings might have be removed (dont know the bikes history) im going to heat the cases anyways. Thanks for the replies, i know i was looking for other methods besides heating the cases and now im going to heat my cases but i was only looking to see if there was any other way for future references. [/QUOTE]