Replacing KTM fork seals

Eyedoc,
if you have done jap ones you can do these set oil ht to 120mm and you will be good to go.

Eyedoc,
When removing the oillock spring guide combination, clean the the fork cap and guide at the engagment point. The Knurled cap is good idea, but leads to contaimantion of the valving if it is not cleaned every time.

ALSO CHECK AND MAKE SURE THE OIL LOCK IS NOT TALLER THAN THE SPRING GUIDE. SOME OF THE 2000 WP FORKS WHERE SET-UP WRONG AND WOULD SHEAR THE LOWER PORTION OF THE GUIDES OFF. It is a very easy fix with a lathe. Simply turn down the od till it fits properly, I would imagine that by now your fork has already been updated, but beware..

Regards,
Jer