2 250racing Member Aug 26, 2002 47 0 Jul 19, 2007 #1 hi guys i called eric gorr today and he told me my kit 144 was shipped yesterday. so eric told me that i had to trim the cases. has anybody done this before? does anybody have some pics or drawings on how to do this any other recomendation or tip when we install the kit? what gearing are you guys running? what jetting are you running? thanks for all your help.
hi guys i called eric gorr today and he told me my kit 144 was shipped yesterday. so eric told me that i had to trim the cases. has anybody done this before? does anybody have some pics or drawings on how to do this any other recomendation or tip when we install the kit? what gearing are you guys running? what jetting are you running? thanks for all your help.
G griffbones Member Sep 12, 2006 329 1 Jul 20, 2007 #2 I thought if mods to the lower end were needed, Eric normaly requested you send the entire engine?
J _JOE_ ~SPONSOR~ May 10, 2007 4,697 3 Jul 20, 2007 #3 I'm pretty sure he sends instructions on how to trim the cases with the cylinder. I would ask Eric if he can give you some general jetting suggestions.
I'm pretty sure he sends instructions on how to trim the cases with the cylinder. I would ask Eric if he can give you some general jetting suggestions.
2 250racing Member Aug 26, 2002 47 0 Jul 20, 2007 Thread starter #4 griffbones said: I thought if mods to the lower end were needed, Eric normaly requested you send the entire engine? Click to expand... thats for guys living in the U.S. but its difficult to ship complete engines from Mexico to the U.S.
griffbones said: I thought if mods to the lower end were needed, Eric normaly requested you send the entire engine? Click to expand... thats for guys living in the U.S. but its difficult to ship complete engines from Mexico to the U.S.