250racing

Member
Aug 26, 2002
47
0
hi guys i called eric gorr today and he told me my kit 144 was shipped yesterday.

so eric told me that i had to trim the cases.

has anybody done this before?
does anybody have some pics or drawings on how to do this

any other recomendation or tip when we install the kit?

what gearing are you guys running?

what jetting are you running?

thanks for all your help.
 

_JOE_

~SPONSOR~
May 10, 2007
4,697
3
I'm pretty sure he sends instructions on how to trim the cases with the cylinder. I would ask Eric if he can give you some general jetting suggestions.
 

250racing

Member
Aug 26, 2002
47
0
griffbones said:
I thought if mods to the lower end were needed, Eric normaly requested you send the entire engine?

thats for guys living in the U.S. but its difficult to ship complete engines from Mexico to the U.S.
 

Top Bottom