Reply to thread

Message: [QUOTE="yammieman, post: 1437477, member: 124169"] lol that wasn't the exact photo of the dent. i put the red dot there to help others get some sort of idea of where the dot is located. the head gasket and cylinder head is already on the bike and bolted up and torqued down so im not sure if the dot is still there without the gasket on. the below picture isn't from the bike exactly....but this is exactly what the chip/divot looks like and exactly how deep and how big it is. the divot goes from the very outside edge of the cylinder where the red dot is in the original photo from post #1... to about half way(width wise/toward the cam chain tunnel area). behind it(where the divot ends and where there is about half a width of flat even surface), the head gasket seals perfectly and the surface is flat. [IMG]http://s29.postimg.org/bdf5dwgab/IMG_20101218_011612b.jpg[/IMG] there is no oil leaks or anything leaking out from there so spose i won't even worry about it. [/QUOTE]