KTMFan
Assumeing you have either a '00 or '01 the stock rear spring is a progressive 7.0-9.0 rate. They went to WP in the frt. with .38 fork springs. I would recomend throwing the progressive spring and installing a straight rate one somewhere around 8.8-9.0 Then I would replace the .38's up frt. with approx .48's. You could also play around with oil height & pre-load also. Just some suggestions, hope it helps.
My 520 exc has .48 in front and 9.2 in back and it looks like I will be doing the same on this one.
I will try 5wt oil on the 200 I have 7wt in the 520.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.