Reply to thread

Message: [QUOTE="davisdrafting, post: 1067596, member: 70072"] [b]adjusting the static timing[/b] when adjusting the static timing would I be turning the pickup or the stator? The timing is not adjustable on my bike so I need to slot the holes just wondering which ones to slot. 92 Yamaha WR200RD Also what is the max degrees in either direction from stock position? Eric Gorr states, “Never rotate the stator plate more than .028in/.7mm past the original standard timing mark” But that depends on what radius from center of crank the timing marks are at. [/QUOTE]