Steerig Dampener issues

I am working on putting a scotts dampener, and Renthals on the bike using the stock triple clamp. I have ordered all of the parts from BRP, and they are looking into the issue, but thought that I'd post it here for all to look at and think about. Basically, the Tower Pin that clamps to the headstock doesnt align with the hole in the dampener arm. it appears to be off by about 10mm.

Here is the quick webpage I put together. dont know why the first pic is 90 degrees off...

http://snozberrybeads.com/kdx.htm

take a look, and let me know what you think.