What is the heaviest wt oil anyone would reccomend in xr200 forks.I started by putting in belray 20 wt at stock level.But it seemed the high speed stability sucked.So i backed off and went to 10 wt but put the max amt in to help prevent bottoming which has worked so far.If i drop to a 7 or 5 wt and add the max amount would the bike be more stable than with the 10 wt.
BTW i have cut 1/2 longer spacers for the springs to help keep the front end up so the frontend is a little stiff b/c of the increased pre-load.
PS another quick querstion how much pre-load should the stem bearings have on them?How easily should the handlebars move from side to side??:uh: :eek:
thanks scott
BTW i have cut 1/2 longer spacers for the springs to help keep the front end up so the frontend is a little stiff b/c of the increased pre-load.
PS another quick querstion how much pre-load should the stem bearings have on them?How easily should the handlebars move from side to side??:uh: :eek:
thanks scott