I ordered the .42kg springs from Race Tech to throw in the forks. I utilitzed their website to calculate the spring rate and also went with their US-1 / 2.5-5 weight oil.
I would like to know any recommendations to set preload, oil level and settings on the clickers.
I weigh 190 and ride very hard in technical terrain that consists of rocks, roots and mud.
One word..... VERMONT!!
Thanks :aj:
P.S. I would like to see the initial travel very forgiving then ramp up to resist bottoming. I just spent my wad on all of the engine mods that this site and Jeff Fredette list, so I don't want to get in to gold valves just yet.
I would like to know any recommendations to set preload, oil level and settings on the clickers.
I weigh 190 and ride very hard in technical terrain that consists of rocks, roots and mud.
One word..... VERMONT!!
Thanks :aj:
P.S. I would like to see the initial travel very forgiving then ramp up to resist bottoming. I just spent my wad on all of the engine mods that this site and Jeff Fredette list, so I don't want to get in to gold valves just yet.