My 2000 rm250 has no spark, and I need to know how to test the components. I have a meter but I need to know wich wires to test and what the readings should be. It isn't the kill switch, or sparkplug.
The failure was just random. I rode the bike, shut it off. 5 minutes later it wouldn't start. Tried bombing, it just started, bogged down and stalled.
I do not have a shop manual for that bike either. Did you pull the left crank cover and inspect the rotor, pick up and stator? Sometimes the drain/vent can get plugged. Inspect all the terminals and connectors. I would take the coil to an auto parts store and ask them to test it. If it works, it is likely the cdi box.