bxb

Member
Oct 7, 2006
8
0
Gasgas pampera 400, bloody stunning.
Problem is I need to do a lot of slow, technical. ( I'm a farmer up the rough end of South Australia)
Throttle response is just too damn quick and the ******* doesnt throttle bog.
Is there a throttle cam on the market to give more precise control at low speed? I fitted one a mate lent me to try and it worked EXACTLY THE OPPOSITE. Must admit it was fun.
 

Swiss

Member
Nov 20, 2001
70
0
I agree, excellent design. I struggled back in the '80s to build a couple of my own from the old Magura side pull Enduro throttles. Cut and glued them and they worked damned well. This is a neat easy to change system that should work great. Don't know what the cost is, but I spend a couple of hours back when I worked on mine to get them done. Hardest part back them was to find a really good glue to be strong enough and hold everything together.

Swiss

After I built mine I thought that I was pretty smart, but then I went and bought an early XR75 for my son to ride and found out that Honda had done this on the stock bikes in the early '70s! :nod:
 
Top Bottom