Thumpstar Front Brake

[Hustle]

Sorry for all the questions latelly.

I took my 10'' wheels off to take them to the shop to get the tyres switched over, but i messed around with the front brake.

I was messing around with it because the breakpads were fully closed (no wheel on the bike so i though this wasn't rite).

So i was messing around with it and the two brake pads came out.

Now i can't get them back in.

I have no experience with brakes watsoever.

A bit of the brake system slides off and im left with two metal clips which come of. I tried putting the bit that slides off back in, then putting the brakepads through the hole, but they just wont stay in, they keep falling out?

How do i put the front brake back together. Thanks

 

[Patman]

I'll try to remember to pull one of our calipers and a set of pads off the shelf this evening and see if I can figure this out for ya. It's not really clear to me just yet.

 

[Hustle]

Cheers.

It has like two metal clips, where you put the brakepads onto, but i can't seem to get them both on.

I would take it to the motorbike shop 0.3 of a mile down the road, but i just got new tyres fitted and they charge £10 per 15 minutes work. So thats like $18 for 15 minutes work.