tm 125 fouling plugs

[bumf]

i have a 98 tm125 i am using 32:1 mix in the fuel and it is supposed to have a br9es spark plug but it keep fouling the plug after about 2 minutes of running i put a br8es plug in and it runs fine but it is the wrong plu is the fuel and oil mix too rich or is the jetting wrong i have ajusted the carb to make it leaner by moving the needle valve a click but it still aint write? any ideas?

 

[kamchuka]

is it stock?

no pipe changes or nothing?
what kind of oil are ya using?
i use a good synthetic, at about 50:1, br8es for a plug. :ride:
that number scares some people, but i've ran it in all my bikes for many years, less foul, less smoke, and seems to run better all around. have not had one blow up yet:)
good luck. someone else might have a better answer.
:ride:

 

[Badgadjit1]

50:1 scares me..hehe...i don't know enough about carbs and stuff to try and make that work hehe...

 

[kamchuka]

try this first

get some good oil...not chainsaw stuff, parts guy should be able to help ya, and run 40:1 or 44:1 and see if that will cure it.
if not you might have a carb prob, ring prob, several things.
have you tested the compr.
should be at least 110-120, but above 120 is best. this is with a cheap home tester, there only about 20-30 bucks, and you just screw it where the plug goes and give her a few good kicks.
thats about all the shadetree i have left....good luck

 

[bumf]

fouling plugs

edit