Reply to thread

Message: [QUOTE="pgbutler, post: 1285172, member: 89237"] [b]Tht is how I ended up mounting the temp sensor today[/b] That is how I ended up mounting the temp sensor today before I read your post.I'm glad I did it the way it was suggested and indeed I did rotate the sensor and hose clamps so they didn't interfer with the tank.As fo the RPM sensor simply ran the red wire to the green wire that supplies signal to the coil.This should work as it is one of the suggested ways in the manual.As far as power goes I asked one of the tech guys about this tapping onto the light and he said that would be the way to do it.The instructions could be more model specific which is my only complaint so far.Thanks for the info regarding the setting for the computer.I will let you know about the temp sensor when I fire it up or if you get a the opportunity before I do let me know how it works. [/QUOTE]