Reply to thread

Message

[QUOTE="canyncarvr, post: 569482, member: 16552"]
Yep.  Happens all the time.

I have at times had trouble resolving the situation until I actually [b]removed[/b] the cones and put them back in.  Which is to say loosening/moving/retightening the assembly didn't work. I'd take the bottom cones and swap them with the top cones just for drill.

I have not had a recurrence of the situation after installing a one piece top clamp (used stock bolts, no washers, had a mount for the odo machined into the piece).  I noted no additional vibration with the one piece clamp.  I can't imagine it wouldn't, but you might ask FRP if their clamp accepts the odo.  The picture on their site looks pretty roundy on the RH side.

I just got a set of cones from scotts.  My imo is they are no good.  The cones are too small.  When assembled, the metal top caps seat against the clamp. (yes, I used the 'for kdx' additional spacers)  Great for rigidity, of no use for bar isolation (which is the point in the first place).

I put the stock cones back in after one ride.  If I want my arms to be numb all the time, I'll buy a pumpkin! ;)
[/QUOTE]

Verification

Which ocean is California closest to?