Rangoonboth
Member
- May 6, 2009
- 1
- 0
I got my cylinder back from US chrome after they bored and replated the cylinder. All the bolt holes had a fair amount of bead blasting sand remaining in them when I went to put the all bolts back in. It took me about 3 hours to get them cleaned out. Has anyone ever had this trouble before.
I called and talked to Scott ( the owner I think) and he was very unapoligetic and flip about this. He told me to run a tap down in the holes and that would fix it. For the $ I paid to have this done, they should have made sure it was clean. It seems that they lack quality control.
I will try there competition next time.
I called and talked to Scott ( the owner I think) and he was very unapoligetic and flip about this. He told me to run a tap down in the holes and that would fix it. For the $ I paid to have this done, they should have made sure it was clean. It seems that they lack quality control.
I will try there competition next time.