My son has a Husky 50J with the Morin motor just like all the other minis. I know that these bikes have problems with stators which is usually due to water getting in. Looking at the platic side cover and the flimsy clips that hold it on it is obvious how the water gets in. He can ride all day on the the motocross track and we don't have any problems. When we go into the woods where there is water and mud it doesn't take long to quit. At this point I have replaced 2 stators. I was going to put a bead of silicone around the inside of the side cover before replacing it but the dealer thought that may cause more problems if the slicone leaked onto the stator.
QUESTION: Have any of you had luck waterproofing these to at least the point of keeping some water out? If so, what was your method.
QUESTION: Have any of you had luck waterproofing these to at least the point of keeping some water out? If so, what was your method.