If you like smooth power try a CEL or CEK. If you like snappier power try a DEL or DEK. You'll probably end up in clip position 3 or maybe 4. I'd have on hand a 42 and a 45 pilot. In main jets I'd have 158, 155, 152, and 150....based on the information you supplied. I currently run 152, DEK/3, 42 with air screw at 1 1/4 out @ 80 degrees and 2800' elevation. I have enough flexibility in this set up to just go up or down on the main based on about 25 degrees up or down from that 80 degree figure (and some adjustment of the air screw). I, however, am running a RAD valve which will require slightly leaner jetting than you will need without one. Your riding style will also come into play in determining your jetting as well as realizing that each bike is a little bit different from the next one when it comes to jetting.