Reply to thread

Message

[QUOTE="AirtimeMosely, post: 989930, member: 57929"]
I have a 04' CR125R.  It has awesome power because I weigh 115 and only ride it in the woods.  However, I heard that adding a new reed valve will give it a big punch.  My only upgrade is a fmf Q pipe.

My bike fouls plugs if i'm not on it in the wooods but goes white in my open feild.  I just get use to it.  I've jetted the bike very lean.  The needle is an entire leaner needle, a leaner slow jet, and a leaner main.  The shop also lowered my bowl level 2mm.  It will also foul plugs on warmup very easily.  I usually foul a plug every thirty miles or so on the trails.  By the way, I run BR9EG's( my dad won't let me run hotter plugs) This is just a little problem that i dont't like.  If you guys have any advice I'd like to hear it, but on to my question.

Which reed valve?

V-Force 3, Delta Force 2, boyseen 607.

I don't know all of them and am not an expert when it comes to bikes so please don't bag on me.  I'd just like to know which one to get.
[/QUOTE]

Verification

Which ocean is California closest to?