I'll check that as well but here is some further detail.
Since cleaning carbs, air filter, new plug, etc. months ago it seemed to run well but was hard too start at least when hot. I then found out the plug gap needed to be .033 or as close as possible. Eventually getting a new plug with that gap, now it does not start or have any spark. It was running, not that well, we ran it for awhile then it sat for a few minutes and it would not refire ? We changed plug (nothing else) and now it does not start or have a spark at all ?
Is there a CDI ? or something that can go ?
How can it be tested ?
Thanks !