joshbot007
Member
- Dec 4, 2012
- 30
- 0
Hi i have a ktm 300 exc 1998. And i orderd a twin filter pre oiled and belry air filter oil. And i put more oil in the filter when it arived (added belry to the pre oiled oil). And knowing me i added a bit to much. The oil has been dripping from the filter in the "outer air box". I would like to know how i can get excessive air filter oil out with out a clean. Could i just let the filter sit a bit? Could I maby do more of the putting the filter between paper towles and pressing? Any sugestions is more than welcome. Also i would like to know saying some how this belry air filter oil or any air filter oil were to get sucked into the 2 stroke engine what the consequences would be. Would it burn off? Would it seize the engine? I know this is still oil bit it is so sticky i would just like to know hypotheticaly if a small bit were to get sucked in what would happen. Dont wana ruin a top end !Again all responces are more than welcome!!!!!