01 cr - want flatter seat

[tmoney]

I ride an 01 cr 250. The seat is now very soft and it feels like I'm sitting in a boat. Is there a good after market pre assembled seat that makes it flatter for making it easier to situp closer to the tank? I'm not sure if the stock foam is what I need. I'm 5.11 and have never tried the taller seat foam on this bike. Any advice appreciated.

 

[Buzz Bomb]

It's because your seat foam is worn out. I'd probably just buy one of those SDG stock replacement seats for abouit $80. It's hard to go wrong.

 

[tmoney]

Thanks Buzz Bomb.

 

[358racer]

Or what you could do is use a razor blade and trim the foam so that it is at the right height for you and put the cover back on.