Bar-Bender
Member
- Nov 19, 2001
- 2
- 0
Follow JD's cleaning guide and you will be fine. The dielectric grease will slow down the corrosion it does not promote conductivity between the two contact points. Your next step is to be careful when assembling the switch case. It is made of plastic and will bow outward when installing the red kill switch. Be sure to install the red switch tabs into the body of the case correctly otherwise you will not have good contact when the switch is engaged. The only real way to test this is by completely assembling the switch and installing on the handlebars. I consider cleaning this switch routine maintenance when powerwashing and riding in muddy wet conditions all the time.