Any info on the stock carburetor would be appreciated....I bought the bike used, it runs, but will not idle. Can not find a carb rebuild kit....Trying to find out what size/model carb is.
G4TR used a 19mm mikuni, vm, but made for the kaw...some differences on the intake side, to bolt to the rotary valve intake.
main jet-5L-13
needle jet was 2.5
I would suspect first the pilot jet, but i dont have any info on what the stock pilot jet was. Sometimes, they are hard to clean, but it can be done. You can get the numbers off the jets, needles, etc and get them from sudco. so even if you have to piece together your own "rebuild kit", you could.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.