While riding the bike it just died and now will not even spark. I have a manual and have checked the coil and it seems to be good. I believe it is a stator problem. At the stator there are two charge coils, one with red and brown wire and one with red/white and red wire and a ground. All grounds have been checked. I get a pulse from all wires except the red/white, should it pulse when turning the motor over?
Comming out of the cdi I get a pulse on the black/white wire that goes to the kill switch, but not from the orange wire that goes to the coil. Should I get pulse here?
Comming out of the cdi I get a pulse on the black/white wire that goes to the kill switch, but not from the orange wire that goes to the coil. Should I get pulse here?
