1993 XR250L IS Driving Me Nuts

[mxracer2000]

I just finished replacing the one piece plastic license plate
holder/rear brake light on my 1993 XR250L. While replacing it was
necessary to dissconnect the rear brake light electrical
connections (3). After putting everything back together I cant get any power when I turn my key to acc. or to on. I replaced the battery a week ago so I know its good. I also checked the fuses by the battery and they all seem fine. What would cause this to happen and what can I do to fix it? The connections at the rear light are all good. This is driving me nuts...Luckily I can kick start.
Thanks

 

[sfc crash]

you said you know your batt is good, check it again,then wire trace, wire tracing is slow and tedious, but must be done sometimes. recheck that battery. i had a 78 xl250s. man, when i could start it life was good.