I have a 2000 KX 250 with the EG 310 kit (very nice). I have the motor pretty much dialed in, but the suspension is giving me headaches.. The shock is ok, as I don't really have problems with that. Mostly my complaints are the thing will not turn to save its life and the forks are real harsh... Here is what I have done so far:
Set race sag to about 95mm (I couldn't adjust the shock with the subframe on so I removed it, and I wasn't wearing my gear). Is there a way to adjust the sag with the bike in one piece? I couldn't fit the wrench in there...
Raised forks 5mm in triple clamps.
The forks seem to bottom very easily, but if I stiffen the compression the bike becomes unstable at higher speeds.
The bike seems to bounce after bottoming.. is this supposed to happen?
If any of you found something that works with this bike let me know!
Set race sag to about 95mm (I couldn't adjust the shock with the subframe on so I removed it, and I wasn't wearing my gear). Is there a way to adjust the sag with the bike in one piece? I couldn't fit the wrench in there...
Raised forks 5mm in triple clamps.
The forks seem to bottom very easily, but if I stiffen the compression the bike becomes unstable at higher speeds.
The bike seems to bounce after bottoming.. is this supposed to happen?
If any of you found something that works with this bike let me know!