2001 yz250 Bad handlebar vibration

R

radiclrad

Member

Jul 5, 2006

3

0

• Jul 5, 2006

• #1

I just bought a yz250 (2001) AND NOTICED THE HANDLE BAR VIBRATION IS TERRIBLE!! Is this normal with this year or might there be a problem. If it is normal what can I do to lessen some of the vibration. My last bike was a 99 kx250 and had no where near the vibration.

 

trial_07

Play with gravity

~SPONSOR~

Apr 26, 2004

1,430

0

• Jul 5, 2006

• #2

What are the handlebars? Did you check the clamps?

 

H

Hurricane19

Member

Mar 24, 2005

15

0

• Jul 5, 2006

• #3

Keep in mind that your kx had rubber mounted handle bars as yz has a solid mounted top triple clamp, assuming it is stock. You may want to look into 1 1/8" bars without a cross bar as they help due to flexing.

 

2

2-strokes-4-life

Member

Mar 1, 2005

231

0

• Jul 5, 2006

• #4

if your having extreme vibration your main bearings may be going bad.when was the last time the motor was rebuilt?you can check the condition of the bearings by trying to move the flywheel up and down and side to side.if you feel any movement the bearings are toast

 

trial_07

Play with gravity

~SPONSOR~

Apr 26, 2004

1,430

0

• Jul 5, 2006

• #5

Side to side movement is normal (although not excessive). Preocupy only with up and down movements.

 

R

radiclrad

Member

Jul 5, 2006

3

0

• Jul 6, 2006

• Thread starter
• #6

Thanks for all the help but I called LSD Racing (Larry Dukes ) and he said to check the engine mounts to see if they are loose. Sure enough, 1 was a little loose, so I put the torque wrench to it and all is good!!

 

trial_07

Play with gravity

~SPONSOR~

Apr 26, 2004

1,430

0

• Jul 6, 2006

• #7

Well that's great to hear! Have fun riding ;)