defo26

Member
Apr 23, 2007
170
0
I was racing and the bike ran fine in practice. Then i get to the gate go to fire it up and it wont start. We finally push start it and it starts. The first lap i went into a turn and it just bogged down so i shifted down to first gear and it went got into the high rpm's again. It kept boggin the whole race tho. Then wen i got off the track i let off the throttle and it just died. Also it was backfiring a lot during the race. I got and discovered the fuel mixture was gone. Do you think that ewas the only problem or do you think the valves may need adjustment now too?
 

Rich Rohrich

Moderator / BioHazard
LIFETIME SPONSOR
Jul 27, 1999
22,839
16,904
Chicago
It's common for the fuel screw to fall out if you adjust it past about 2 turns. Replace the fuel screw the spring the washer and the o-ring and you should be fine, assuming the bike was fine before it fell out.
 
Top Bottom