Ya, I'm going to do the revalve or at least have it done. Today I adjusted the compression and the rebound all the way to "s". I also moved the handlebars a bit closer to me so they were not so far out of reach and the bend feels better on my wrists. It's better but still a bear. I took a look at the rear shock Which was also verry stiff for my riding style and took some of the tension off the spring. It seemed to help. the "jam nuts" are about in the middle of the threads now, maby a bit higher than the middle of them. I'm lookin for a plush ride. Remember I used to ride a bike that actualy had a seat. (LOL) This bike is awsome though it's verry hard to keep the front end down. But I don't think thats a suspension problem as much as it is the fact that this thing just runs hard. It just kills my brothers husqvarnas and they are not weak 250(s) But anyways, while adjusting the rear spring tension I discoved that my sub-frame was broken on one side and cracked on the other. So, I guess it's off to the tig welder for repair. might be a good time to do that revalve,huh. Thanks guys, I'll be around. HADAR