yam 3

Member
May 19, 2000
248
0
I would like to try adding the 8cc of oil to the outer chamber of the forks. My question is can I add the oil through the bleed hole. Thanks in advance.
 

russ17

Member
Aug 27, 2002
301
0
The passage from the outer tubes to the bleed screw is not direct like the old version of the KYB .The passage is actually built into the base and is very small on these. Try it , It might take awhile this way.

Russ
 

osheen

Member
Feb 27, 2000
202
0
Yes, that passage is really small. I used it to take some oil out and I had to compress the fork really hard while upside down to get some to come out. It was a lot easier to just take the cap off and do it that way. I thought about making the holes a little bigger so it would be easier.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom