yz250flash
~SPONSOR~
- Aug 8, 2003
- 150
- 0
I need a measurement. I have an extra stock silencer and I want to try and cut it down into a shorty to see if it gives me anymore low end power. I am experimenting here.
What I need is for someone to give a measurement of the length of the canister. Only the aluminum canister that you removed when re-packing (not to include the silencer tip) only the round or oblong canister.
I would like measurements for both the Pro-Circuit R-304 shorty and FMF shorty if different people have them. I did a search and omly came up with the measurements for a CR125 shorty.
I will post the results of this experiment after it's done.
What I need is for someone to give a measurement of the length of the canister. Only the aluminum canister that you removed when re-packing (not to include the silencer tip) only the round or oblong canister.
I would like measurements for both the Pro-Circuit R-304 shorty and FMF shorty if different people have them. I did a search and omly came up with the measurements for a CR125 shorty.
I will post the results of this experiment after it's done.