- Aug 29, 2004
- 2,958
- 0
i just changed the water pump on a clarklift cmp30 forklift which involves tearing everything off the front of the motor to remove the timing belt cover and then the belt comes off to get the pump out. well now it wont start. the question is if one of the gears came out of sync is there any way my timing light still would be showing the thing is still in time?? what else could i have done to this thing? i know the cam and crankshaft didnt move but the oil pump gear might have, does it control something besides the oil pump?
ps it is a propane model with a 2.0l SOHC mitsubishi motor
ps it is a propane model with a 2.0l SOHC mitsubishi motor