ballpark jetting 36mm carb only

[kmccune]

I bought a PKW off **** awhile back that has been bored to 36mm and I just got around to putting it on yesterday. I have not gutted the pipe yet but the airbox cover is off. Anyone have a base setting to start from? All the info that I could find on a carb swap included the pipe. Average ride temps will be around 75-80 degrees and elevation is about 1000feet. The carb has a 150 main, a 48 pilot and a R1172N needle. It runs pretty well but is obviously rich ( lots of blue smoke) I just wanted to have a good base line for when it warms up to start jetting from.