Basic Suspenion Tuning for my CR

[jaypro55]

I took my first ride in about 2 months yesterday and I am finally realizing the potential of my machine, and I need to set it up to better suit my weight and riding style.

I am about 5'11 and a little over 190 lbs. I ride an '01 CR125. Right now the suspension is at the stock settings I believe. I need it to be stiffer to suit me. Most of our jumps are pretty tiny but I can feel a good deal of travel even on those. Without getting too crazy, how can I stiffen up the front and back of my bike, not too stiff to where I take a beating but stiff enough so I don't travel too much on little bumps and jumps.

 

[JTT]

Start with setting sag, as per your manual, or tuning guide at www.mxtech.com Play with clickers from there to fine tune. Again the tuning guide at MX Tech is invaluable.

 

[marcusgunby]

Also look into the spring rate generator-see if the springs are correct for your weight.

 

[jaypro55]

Ok sounds good. I need to get a spanner though for the rear shock, hopefully I can borrow one from someone.

 

[JTT]

You don't really "need" a spanner. You can use a punch and hammer to loosen the lock collar, then simply turn the spring to turn the preload collar.

 

[jaypro55]

Yeah I did it before on my XR200 with a screwdriver and rubber mallet. It worked well although it dug in a little. I suppose something with a little more blunt tip on it would be better.

 

[INDSKYS]

JTT hey buddy i cant get no where with the mx tech link u posted is it still valid?

 

[marcusgunby]

www.mx-tech.com

 

[JTT]

...oops...