I have an '86 KDX200. I have four wires coming from the magneto going to the CDI and lights. The yellow one goes to the light switch. The other three go to a three way connector. The colors are white/red stripe, black, blue. The connector they plug into has only two connections on it. The colors on that are white/red stripe and black. There is no blue wire on the CDI or anywere else for that matter. The connector can plug together two different ways leaving one wire hanging. How do you connect them? The manual shows all wires connecting to the CDI! I have spent a lot of time and money on this thing and I would really like to see it running! Any help would be most awesome!