chain tightening

D

dave2005

Member

Jun 1, 2007

60

0

• Oct 16, 2007

• #1

I have a 1998 KTM EXC 125 and my chain is getting pretty loose. I was reading in my instruction manual that I need a torque wrench in order to tighten up my chain. The manual says if I do not have a torque wrench to see my dealer.
Well, you guessed it, I don't have a torque wrench. So, is it necessary to have one or can I just follow the directions in the manual and tighten my chain without a torque wrench?

Thanks,

Dave

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• Oct 16, 2007

• #2

Torque wrenches are cheap... 59 bucks at Sears. If you're working on your own bike, this is one tool besides your service manual you should have...

 

7

76GMC1500

Uhhh...

Oct 19, 2006

2,142

1

• Oct 16, 2007

• #3

A torque wrench, to tighten the axle nut? All it needs to be is really tight.

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• Oct 16, 2007

• #4

"really tight" is pretty subjective.. If this guy is a big ass football player type, really tight might break the axle. If he's a skinny dork (like I used to be), really tight might not be good enough. This is why they make a tool to measure tightness.

As I said, 59 bucks at Sears, no guessing then.

 

D

dave2005

Member

Jun 1, 2007

60

0

• Oct 17, 2007

• Thread starter
• #5

as indy said I am the big ass football player guy that would bust the axle.
Now, that being said, I have never used a torque wrench, and the book didn't tell me how much to tighten it. Is there a certain number I should be looking for.
Thanks guys

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• Oct 17, 2007

• #6

Your Service Manual should have all of the torque specs for your bike.. If you don't have one, I highly suggest that too.