Originally posted by madmatt
What is the best and fastest way to change out the chain and srockets on my 99 YZ125? I haven't gotten to that part after putting new bearings in the front wheel and rebuilding the top end and clutch. Also, does anyone have any recommendations for a chain and sprockets? I have Renthal front and rear sprockets (stock Gearing) and a DID chain.
Not in my case. I bought the Sidewinder stuff and it did not perform well on my bike. The sprockets are fine but I am now running an RK X-ring chain.Originally posted by little jeff
Get a Sidewinder sprocket and chain combo. Probably be the last chain and sprockets you'll buy for a long time in my opinion.
Little Jeff
I haven't run one yet, but they are about $20 more than the RK X-Ring.Originally posted by 2000SE
are DID O ring chains even any good?
Once a chain reaches 3% growth it can damage the sprocket teeth and should be changed out. Remember when measuring for wear, the first pin is 0 which means a ten reel measurement involves 11 pins.Originally posted by madmatt
Thanks guys, I really appreciate all of the help! How can I judge how much chain wear is too much??
Matt
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?