clutch problem

C

chevy2point2

Member

May 22, 2007

4

0

• May 22, 2007

• #1

i recently took most of my bike apart (besides the tranny and clutch) and clean it all out cuz i had to replace a broken exhaust valve neway...but now that i have put it all back together (besides a few parts), when i pull the clutch lever in its staying in unless i push it back out...i didnt take the clutch apart but i did remove the clutch cover to repaint it...cant figure out wat i did wrong....any help would be appreciated, Bill

 

8

84cr125

Member

Apr 8, 2007

292

0

• May 22, 2007

• #2

what bike is it?

 

Sand_man

Member

Jun 30, 2006

145

0

• May 22, 2007

• #3

well that means that you might have eather a pinch in the cable, or maybe the cable is stretched to far from excessive wear, or maybe you didn't put it back together properly. how exactly did you take it apart?

 

C

chevy2point2

Member

May 22, 2007

4

0

• May 23, 2007

• Thread starter
• #4

all i did was remove the clutch cover and remove the handle bars(things i did that involved clutch) but im gunna see if there is nething wrong with the line, but besides that i dont kno wat could have hapend

 

Sand_man

Member

Jun 30, 2006

145

0

• May 23, 2007

• #5

yea me eather, my best guess is that you have a pinch, or bend in the clutch cable.
-Tony #422

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• May 23, 2007

• #6

take the clutch cover back off, see what's binding it up..

 

C

chevy2point2

Member

May 22, 2007

4

0

• May 24, 2007

• Thread starter
• #7

i think i might know the problem but im not an expert with clutches so i dont know....i just took off my clutch cover and the little round thing with the threads on one side of it that sticks out has alot of play, not just in and out but up/down/side to side too, does the little clip ("C" shape with a hole on each end) go on the inside or should i be able to see it?